2006-2024 BMW Reverse Camera Interface Kits (CIC up to iD7 MGU)

The ICI-1 is a retrofit aftermarket reverse camera interface that provides an OEM intergrated reverse camera functionality for your BMW 1 Series. Covering all CIC, CHAMP, NBT, ENTRYNAV, ENTRY, CHAMP2, ENTRYNAV2, NBT EVO and MGU systems. The ICI-1 works by communicating with your existing iDrive system as well as your in-car entertainment system along with the supplied reverse camera that fits into the bootlid or number plate light (depending upon the model). It operates in either by-pass mode or in “active mode”. In by-pass mode the ICI-1 does not affect the normal operation of the in-car entertainment system, the standard BMW “NBT/NBT EVO” user interface and the standard BMW navigation system(if fitted) will be shown on the CID when in by-pass mode. Active mode is initiated when you enter reverse gear, which activates the ICI-1 and the display will switch over to the reverse camera interface and show both the image of the camera on screen as well as the parking sensor graphics if your vehicle has them fitted. You will also still hear the BMW parking beeps for audible feedback. Which iDrive do you have?  Use the images below to determine your iDrive version, if you are unsure you can email us with your vehicle VIN/Pictures and we will confirm for you. ENTRY iDrive CHAMP/CHAMP2 iDrive CIC iDrive ENTRYNAV iDrive NBT / iD4 EVO iDrive iD5 EVO iDrive iD6 EVO iDrive MGU iD7 iDrive INTEGRATION WITH iDrive CONTROLLER The BMW iDrive controller provides full control of the ICI-1 reverse camerra module in order to configure and set up the unit. After initial setup there is no need to interact with the ICI-1, it will switch over automatically to the reverse camera and back again to iDrive.   COMPATIBILITY CIC Module Compatibility: BMW 1 [E81][E82][E87][E88] (9/2008-3/2014) BMW 1 [F20][F21] (9/2011-3/2013) BMW 3 [E90][E91][E92][E93] (9/2008-10/2013) BMW 3 [F30][F31][F34][F80] (2/2012-11/2012) BMW 5 [E60][E61] (11/2008-5/2010) BMW 5 [F10] (3/2010-9/2012) BMW 5 [F11] (9/2010-9/2012) BMW 5GT [07] (10/2009-7/2012) BMW 6 [E63][E64] (11/2008-7/2010) BMW 6 [F12][F13] (12/2010-3/2013) BMW 6 [F06] (3/2012-3/2013) BMW 7 [F01][F02][F03] (11/2008-7/2013) BMW 7 [F04] (11/2008-6/2015) BMW X1 [E84] (10/2009-6/2015) BMW X3 [F25] (10/2010-4/2013) BMW X5 [E70] (10/2009-6/2013) BMW X6 [E71] (10/2009-8/2014) BMW Z4 [E89] (4/2009->) Cars with OEM iDrive Professional CIC 6.5″ / 8.8″ / 10.25″ display / 4Pin LVDS connector NBT Module Compatibility (Covering ENTRYNAV, ENTRY, CHAMP2, NBT and iD4 EVO): BMW 1 [F20][F21] (7/2011-6/2016) BMW 2 [F22][F23][F45] (4/2014-6/2016) BMW 3 [F30][F31][F35] (6/2011-6/2016) BMW 4 [F32][F33][F36] (9/2014-6/2016) BMW 5 [F10][F11] (2012-2017) BMW 5GT [07] (2012-2017) BMW 6 [F12][F13][F06] (2012-6/2016) BMW 7 [F01][F02] (2012-2017) BMW X1 [E84] (2012-6/2015) BMW X3 [F25] (2012-7/2016) BMW X4 [F26] (7/2012-2016) BMW X5 [F15] (2012-7/2016) BMW head units NBT ID4 with 6.5″ / 8.8″ / 10.25″ display / 6Pin LVDS connector iD5/iD6 EVO Compatibility (Covering ENTRYNAV2, iD5/iD6 EVO): BMW 1 [F20][F21] (7/2016->) BMW 2 [F22][F23][F45] (7/2016->) BMW 3 [F30][F31][F35] (7/2016->) BMW 4 [F32][F33][F36] (7/2016->) BMW 5 [G30][G31][G38] (9/2016->) BMW 6 [F12][F13][F06] (7/2016->) BMW 7 [G11][G12][G13] (7/2016->) BMW X1 [F48] (7/2016->) BMW X3 [F25] (7/2016->) BMW X3 [G01] (11/2017->) BMW X4 [F26] (7/2012->) BMW X5 [F15] (7/2016->) BMW X6 [F16] (7/2016->) BMW Z4 [G29] (9/2018->) BMW HEad Units with NBT-EVO/ENTRYNAV2 ID5 / ID6 with 6.5″ / 8.8″ / 10.25″ display / 6Pin LVDS connector iD7 MGU Compatibility: BMW 1 [F40] (11/2018->) BMW 2 [F44] (2019->) BMW 2 [G42] (2021->) BMW 3 [G20][G21] (11/2018->) BMW 4 [G22][G23][G26] (2020->) BMW 5 [G30][G31] (9/2016->) BMW 6 GT [G32] (6/2017->) BMW 7 [G11][G12] (7/2015->) BMW 8 [G14][G15][G16] (7/2018->) BMW X3 [G01] (7/2017->) BMW iX3 [G08] (2020->) BMW X4 [G02] (4/2018->) BMW X5 [G05] (8/2018->) BMW X6 [G06] (8/2019->) BMW X7 [G07] (3/2019->) BMW Z4 [G29] (11/2018->) MGU ID7 10.25″ or 12.3″ monitor Features The IMI-1000 main PCB is a high speed microcomputer focusing on providing an OEM experience Rear parking camera Front parking camera (please note forward camera is only compaitble with automatic vehicles) Video input Information about the included return FPG movable guide lines PDC display of parking sensors CVBS / PAL / NTSC camera Avaiable Cameras (The appropriate camera type will be supplied with the kit, if there is no boot mount handle camera avaiable a drill mount camera will be provided) Camera for BMW X1 F48 49 X2 FX39 X3 G08 X4 X5 X6 1 3 5 Series F52 F34 G28 G30 2018-2020 F40 F44 2 Series Models Camera for BMW F10 F11 F12 F15 F22 F25 F30 F31 F34 F48 models Camera for BMW E60 E61 E70 E71 E72 E81 E82 E84 E88 E87 E90 E91 E92 E93 models