High Power 802.3bt Outdoor Waterproof PoE Splitter
$ 86.91
High Power 802.3bt Outdoor Waterproof PoE Splitter is an industrial-grade outdoor-capable device for high power non-PoE devices set up over single UTP cable.Coupled with 95W PoE PSEs, there is 60W remained output power for various power hungry IP devices even when install at outdoors without concerns of bad weathers and ultra high or low temperature. The Fastcabling High Power 802.3bt Outdoor Waterproof PoE Splitter is specially designed for outdoor tough environment applications because it has great waterproof capacity. PoE splitter can create an integrated PoE and non-PoE Gigabit network. There is no need to buy an expensive PoE switch and it helps install Non-PoE devices without any electrical wiring and outlets especially at hard to reach locations.It works together with Ultra 95W PoE PSEs, such as 5720-74 95W PoE injector and 5543-60 90W PoE switch, and the system enables to deliver a maximum of 60W output power to front end non-PoE devices, such as POS, AIO (All-in-One) touch PC and thin-client, digital signage and display tablet, PTZ speed dome and the network devices that need higher power to work normally. This splitter is also backward compatible with PoE IEEE802.3af/at that suits for low power consumption IP devices such as fixed IP camera, wireless access point.It comes with a longer usage life and works stably as its extremely qualified IP67 waterproof rating and durable metal housing as well as wide working temperature range from –40 to 75°C. Besides, it supports carrier grade surge protection, saving a lot hassle to use extra protective measures and reducing frequent maintenance and replacement.It is transparent to the network protocols and Mac address. Simple plug and play makes both power and data are transmitted through the PoE splitter, then it splits the combined data and power stream into two separate cords for various high power non-PoE applications, and 10/100/1000Mbps Ethernet connection can be accessed. How it Works 5-Port 30W/90W IEEE802.3bt PoE Switch5543-80 High Power 802.3bt Outdoor Waterproof PoE Splitter5721-46 *Click the tag to view the products detail Documentation BenifitsCost saving-integrates the existing non-PoE IP device with PoEIdeal solution for high power applications require outdoor or industrial installationComplies with IEEE 802.3bt PoE end-span/mid-span PDSupports PoE 60W Max. Output powerIP67 waterproof rating and durable metal housingWaterproof RJ45 Ethernet cable connector and shielded plug–40 to 75°C wide range operating temperatureSimple plug and play, no configuration requiredSplits the 50~55V DC power over RJ45 Ethernet cable into DC 12V outputRemote power feeding up to 100 meters Technical Drawing What is included?1. High Power 802.3bt Outdoor Waterproof PoE Splitter2. User Guide ResourceProduct Catalog FASTCABLING Product Catalog—Power Over Ethernet Product Specification Datasheet 5721-46 High Power 802.3bt Outdoor Waterproof PoE Splitter Installation Instruction Quick Guide 5721-46 High Power 802.3bt Outdoor Waterproof PoE Splitter Knowledge base Support Library – High Power 802.3bt Outdoor Waterproof PoE SplitterTest Report 5721-46 Electromagnetic Compatibility Test Report 5721-46 Hardware Test Report 5721-46 Reliability Test Report 5721-46 Signal Integrity Test Report Installation Video Do you have any questions or concerns? Knowledge base Contact Us How to build a PoE network system for high powered devices? Power hungry applications have been used in office and home widely, therefore the demands of new high power PoE are increasing, which means advanced PoE technology and standard are urgenly needed for providing steadier power and network to these power hungry IP devices. Thankfully, you’re not completely out of luck, you can find cost-saving and safe solutions in Fastcabling, meanwhile, the solutions we provide is also suitable for your existing non-PoE system.Read more
