10G 30W 802.3at PoE Midspan Injector
$ 51.18
30W 802.3at PoE Midspan Injector can add the power to Ethernet cable and transmit PoE with up to 30W power and 10G bandwidth to edge IP devices.There is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Both power and data are running over signal Ethernet cable which makes the installation convenient and cost-saving. 30W PoE InjectionInject 30W high power to the existing main network system to get PoE transmission for high power PoE devices. 10G PoE PortSupports 1G/2.5G/5G/10 Gigabit Ethernet network speed, satisfying high network speed requirements with less latency.Safe ConnectionWith power handshaking to verify the edge device, overload protection, carrier grade surge protection.Easy to UseTransparent to the network protocols and Mac address, does no harm to the original main network system. PoECompatible with IEEE802.3af/at standard, PoE/PoE ; no additional AC outlet required near the connected PDs. Easy and Flexible InstallationPalm-sized, with built-in power supply, plug-and-play, wall mounting, desktop mounting.LED IndicatorsDisplay the current status of the device intuitively, and give convenience to quick diagnose. Documentation Technical Drawing FAQQ: Does the injector need to be plugged in the power?A: Yes, the injector need to be plugged in a power outlet. That is how the Ethernet cable getting the power from.Q: Can I use one network cable to supply power and data or will I need two network cables?A: One network cable. The injector will add the power to the same cable you were using to transport the data.Q: Can I connect a normal POE device to a POE port of this switch?A: Yes, this injector is back-forward compatible with PoE. The injector will detect current feedback from normal PoE device to determine whether it is PoE or PoE .Q: Can the injector be used in the extreme environment?A: No, the working temperature is 0℃~40℃. However, the industrial-grade splitter can be used in the extreme environment outdoor.Q: Do I need a PoE injector for each IP camera I need to connect and power?A: Yes, one PoE injector for one IP camera. What is included1. 10G 30W 802.3at PoE Midspan Injector2. User Guide ResourceProduct Catalog FASTCABLING Product Catalog—Power Over Ethernet Product Specification Datasheet 5720-14 10G 30W 802.3at PoE Midspan Injector Installation Instruction Quick Guide 5720-14 10G 30W 802.3at PoE Midspan Injector Knowledge base Support Library – 10G 30W 802.3at PoE Midspan Injector Test Report 5720-14 Reliability Test Report 5720-14 Electromagnetic Compatibility Test Report 5720-14 Hardware Test Report 5720-14 Signal Integrity Test Report 5720-14 Temperature Rise Test Report Installation Video Do you have any questions or concerns? Knowledge base Contact us Utilize PoE for Non-PoE PoE is a straightforward technology that transmits power and data via a network cable to the PoE-compatible devices, which highly reduces the installation and labor costs in building or expanding a network system.Read more
